MXL rubber open synchronous belt body is made of imported high quality synthetic neoprene rubber, and mixed with a variety of different uses of rubber accessories; The skeleton material is imported high quality glass fiber rope; The tooth surface is protected by nylon 66 high tensile cloth.

MXL rubber open synchronous belt and MXL rubber synchronous belt transmission performance is similar, can be widely used in textile, light industry, chemical industry, machine tools and other general machinery for power transmission, suitable for multi-axis transmission. Customers can flexibly cut the length according to actual needs.

The model and specification of MXL rubber open synchronous belt are the same as that of MXL rubber single tooth synchronous belt, which is cut by spiral shape of large size mold.

MXL rubber open synchronous belt application range

The performance of the door machine system (automatic door, automatic curtain machine) is suitable for linear reciprocating movement, and its positioning is accurate and its carrying capacity is large, which is the best choice for reciprocating positioning transmission

MXL rubber open sync tape material

High quality rubber raw material, high strength glass fiber cord, high strength tooth surface cloth

Note when using MXL rubber open synchronous belt:

1, pay attention to MXL rubber open synchronous belt surface clean, belt without distortion, full teeth.

2, MXL rubber open synchronous belt products should be strictly prohibited to bend, so as not to damage the skeleton material, affecting the strength of the belt.

3, MXL rubber open synchronous belt must not scratch the belt, so as to avoid early damage to the belt. MXL rubber open synchrobelts avoid contact with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid, etc.).

4, MXL rubber open synchronous belt try to avoid long-term contact with oil and water.

5, When replacing the MXL rubber opening synchronization belt, the tension of the belt must be reduced to a minimum before it can be taken out. It is strictly prohibited to use non-professional tools to pry down the MXL rubber opening synchronization belt in the case of high tension.

MXL rubber open synchronous belt connection method:

Generally, the method of MXL synchronous belt tooth plate is used to fix and connect.